FredG
March 3rd, 2004, 08:06 PM
I vote that you work the shot from every angle and show us what you came up with.
Gary
No disrespect. Just wondered what it would look like from every angle.
Oh, did you mean one at a time? :)
Fred
http://www.dphoto.us/forumphotos/data/581/334Stair_Kal.jpg
Gary
No disrespect. Just wondered what it would look like from every angle.
Oh, did you mean one at a time? :)
Fred
http://www.dphoto.us/forumphotos/data/581/334Stair_Kal.jpg
wallpaper Star wars The clone wars
freedom1
01-22 04:18 PM
i got similar message, but this was for Advance Parole not 485...
Application Type: I131, APPLICATION FOR USCIS TRAVEL DOCUMENT
Current Status: Document OTHER THAN CARD manufactured and mailed.
On ... we mailed the document we manufactured based on our earlier approval of this case, and mailed it to the address on we have on file. You should receive the new document within 30 days. If you do not, or if you move before you get it, call customer service.
Your AP might be on your way!
Freedom1.
Application Type: I131, APPLICATION FOR USCIS TRAVEL DOCUMENT
Current Status: Document OTHER THAN CARD manufactured and mailed.
On ... we mailed the document we manufactured based on our earlier approval of this case, and mailed it to the address on we have on file. You should receive the new document within 30 days. If you do not, or if you move before you get it, call customer service.
Your AP might be on your way!
Freedom1.
wam4wam
09-21 11:45 AM
i kept telling you guys since last week
send faxes to congress /house...it is in the house where bills get structured.
make sure u add only the SKIL bill...just remove cap for ppl with advanced us degrees...that was the only thing the house had agreed to consider
but everyone on this forum ignored me
no it might be too little too late
i am not saying all i slost...atleast we got some action going amongst the members of this site
it aint rocket science guys....think about it from the lawmakers point of view....would they allow for more immigration frindly reforms now....no way...so be ready to compromise and suggest the ones which are truly benefecial to the US economy....
the bottom line was always...borders secure first..then talk about immigration reforms....
for the coming seasons....we have to push for nothing but the SKIL bill
that is the only bill that has hope
the other glimmer of hope in all this is the house has inadverently left out the fact on how they are going to fund the building of the wall
it is here that we step in...
fees for filing I485 for people under SKIL
fees for being able to file 485 before visa numbers
etc etc etc
we have to take advantage of this opportunity
in the mean while....SEND FAXES ABOUT SKIL BILL
send faxes to congress /house...it is in the house where bills get structured.
make sure u add only the SKIL bill...just remove cap for ppl with advanced us degrees...that was the only thing the house had agreed to consider
but everyone on this forum ignored me
no it might be too little too late
i am not saying all i slost...atleast we got some action going amongst the members of this site
it aint rocket science guys....think about it from the lawmakers point of view....would they allow for more immigration frindly reforms now....no way...so be ready to compromise and suggest the ones which are truly benefecial to the US economy....
the bottom line was always...borders secure first..then talk about immigration reforms....
for the coming seasons....we have to push for nothing but the SKIL bill
that is the only bill that has hope
the other glimmer of hope in all this is the house has inadverently left out the fact on how they are going to fund the building of the wall
it is here that we step in...
fees for filing I485 for people under SKIL
fees for being able to file 485 before visa numbers
etc etc etc
we have to take advantage of this opportunity
in the mean while....SEND FAXES ABOUT SKIL BILL
2011 Star Wars: The Clone Wars
sachug22
09-13 03:25 PM
deleted
more...
MatsP
June 1st, 2006, 09:06 AM
Telling other people what lenses to buy (or not to buy) is often hard, for several reasons:
- You probably have a better idea what you want than I do.
- Before you posted here, you probably have made your mind up somewhat.
- My personal preference doesn't really match yours.
- etc, etc.
That's never stopped me from trying to tell people what to do, tho'! ;-)
Now, what lens you should buy depends VERY MUCH on what you want it to do. A 70-300 will be an "OK" lens, it's a budget version - but as you say, it's a lot of money to you, and telling you that you'd get a much better lens if you spend 3x or 5x the money will not really solve a problem.
The things you should consider, however, is if it's going to be good enough for the things you mention:
- Landscapes - a 70-300 lens is probably too long most of the time - your 18-55 is probably a better landscape lens.
- Portrait - Yes, certainly. It's a bit too small an aperture to be a GOOD portrait lens - you want something around f2.0-2.8 - but unless you buy a SPECIFIC lens for portraits, you'd probably not going to get there for anything but A LOT of money.
- Macro . The close-up distance is 5'/1.5m. Depending on the size of insects/flowers and type of photos you want to take, this may be fine or not close enough. However, it's pretty easy to simulate this in the shop, using for instance a coin some such instead of the flower/insect. So if you think that the smallest flower you'd ever want to get a real close-up of is the size of a quarter, lay a quarter on the floor, and try to take a picture of it with the 70-300 lens... Do you get close enough to fill most of the frame, or does it look like a bit lonely with lots of space around it? Can you accept it? Obviously, most insects are slightly smaller than a quarter - except for butterfly's.
There aren't many other options to replace the 70-300, that are reasonably low cost. I'm sure you could find some sigma or other non-Nikon brand lens that is less expensive and do roughly the same, with approximately the same result and the added risk that it's not quite as good at working together with the Nikon camera - at least if it's a Nikon camera and lens you can complain to ONE place and hopefully getting it fixed, rather than being stuck between two companies that neither will take responsibility for your equipment not working... [Although Sigma is more likely to fix a non-compatibility problem than Nikon, of course].
I just noticed that Nikon actually has three different lenses of roughly the same range, a 75-300/4.5-5.6, 70-300 4.0-5.6D ED and 70-300 4.0-5.6G - the latter is a lot cheaper and specifically designed for digital SLR (using smaller lens-elements since the sensor is smaller than the original 35mm film). Not sure if there's much optical different between them. ED should be slightly better optically (and you'd hope so for more than double the price!).
There are a few things that come to mind:
1. If you are SERIOUS about macro photography, you probably want to get a proper macro lens - they get MUCH closer to the subject. There's a Sigma 50/2.8 that costs about $300 which will be a good starting point. A poor mans version is "macro filters", which is basically a screw on lens that goes on the front of the filter screw of your usual lens. They are not quite as good optically, but at least allows you to get close enough to get the subject. The macro lens would also be good as a portrait lens, if you want to get a bigger aperture for that.
2. If you really want to do "big" landscapes, you may need some more wide-angle than the 18-55 gives you. That's obviously not NECESSARY, but for some scenery, it's hard to get far enough away from the subject with a longer lens. Unfortunately, there's really no substitute for dollars here, you'll have to pay for it or not get it, so no easy solution. A Sigma 12-24mm is $689, and that's obviously a lot of money... [Yes, you can get screw on wide-angle lenses too, but if the close-up ones are OK, these aren't - making wide-angle lenses is HARD - magnifying glasses aren't too difficult to make!]
3. You'll almost certainly need a tripod - both for landscapes and macro photography.
Finally: Whilst it's good to consider the purchase, waiting TOO long will make you miss oppurtunities of using the equipment.
Best of luck, and please feel free to ask further questions...
--
Mats
- You probably have a better idea what you want than I do.
- Before you posted here, you probably have made your mind up somewhat.
- My personal preference doesn't really match yours.
- etc, etc.
That's never stopped me from trying to tell people what to do, tho'! ;-)
Now, what lens you should buy depends VERY MUCH on what you want it to do. A 70-300 will be an "OK" lens, it's a budget version - but as you say, it's a lot of money to you, and telling you that you'd get a much better lens if you spend 3x or 5x the money will not really solve a problem.
The things you should consider, however, is if it's going to be good enough for the things you mention:
- Landscapes - a 70-300 lens is probably too long most of the time - your 18-55 is probably a better landscape lens.
- Portrait - Yes, certainly. It's a bit too small an aperture to be a GOOD portrait lens - you want something around f2.0-2.8 - but unless you buy a SPECIFIC lens for portraits, you'd probably not going to get there for anything but A LOT of money.
- Macro . The close-up distance is 5'/1.5m. Depending on the size of insects/flowers and type of photos you want to take, this may be fine or not close enough. However, it's pretty easy to simulate this in the shop, using for instance a coin some such instead of the flower/insect. So if you think that the smallest flower you'd ever want to get a real close-up of is the size of a quarter, lay a quarter on the floor, and try to take a picture of it with the 70-300 lens... Do you get close enough to fill most of the frame, or does it look like a bit lonely with lots of space around it? Can you accept it? Obviously, most insects are slightly smaller than a quarter - except for butterfly's.
There aren't many other options to replace the 70-300, that are reasonably low cost. I'm sure you could find some sigma or other non-Nikon brand lens that is less expensive and do roughly the same, with approximately the same result and the added risk that it's not quite as good at working together with the Nikon camera - at least if it's a Nikon camera and lens you can complain to ONE place and hopefully getting it fixed, rather than being stuck between two companies that neither will take responsibility for your equipment not working... [Although Sigma is more likely to fix a non-compatibility problem than Nikon, of course].
I just noticed that Nikon actually has three different lenses of roughly the same range, a 75-300/4.5-5.6, 70-300 4.0-5.6D ED and 70-300 4.0-5.6G - the latter is a lot cheaper and specifically designed for digital SLR (using smaller lens-elements since the sensor is smaller than the original 35mm film). Not sure if there's much optical different between them. ED should be slightly better optically (and you'd hope so for more than double the price!).
There are a few things that come to mind:
1. If you are SERIOUS about macro photography, you probably want to get a proper macro lens - they get MUCH closer to the subject. There's a Sigma 50/2.8 that costs about $300 which will be a good starting point. A poor mans version is "macro filters", which is basically a screw on lens that goes on the front of the filter screw of your usual lens. They are not quite as good optically, but at least allows you to get close enough to get the subject. The macro lens would also be good as a portrait lens, if you want to get a bigger aperture for that.
2. If you really want to do "big" landscapes, you may need some more wide-angle than the 18-55 gives you. That's obviously not NECESSARY, but for some scenery, it's hard to get far enough away from the subject with a longer lens. Unfortunately, there's really no substitute for dollars here, you'll have to pay for it or not get it, so no easy solution. A Sigma 12-24mm is $689, and that's obviously a lot of money... [Yes, you can get screw on wide-angle lenses too, but if the close-up ones are OK, these aren't - making wide-angle lenses is HARD - magnifying glasses aren't too difficult to make!]
3. You'll almost certainly need a tripod - both for landscapes and macro photography.
Finally: Whilst it's good to consider the purchase, waiting TOO long will make you miss oppurtunities of using the equipment.
Best of luck, and please feel free to ask further questions...
--
Mats
mhtanim
06-08 02:44 PM
Wow...another LUD today. So far this is what happened: after sending RFE response, I got 1st LUD on 06/02/2009 with message change.
Soft LUDs on: 06/03/2009, 06/04/2009, 06/05/2009, 06/08/2009
My PD is not current and my application cannot be approved at this time. Not sure why I am getting so many LUDs.
Soft LUDs on: 06/03/2009, 06/04/2009, 06/05/2009, 06/08/2009
My PD is not current and my application cannot be approved at this time. Not sure why I am getting so many LUDs.
more...
ashkam
08-03 09:44 AM
If Priority date is 'Current', you can't apply for H1 extension!
I know someone whose H1 is expiring soon. He wasn't able to apply for H1extension till July 31st as PD was current. He is applying in August in Premium.
What happens if someones PD remains current ( say someone in 2000 stuck in FBI namecheck) and GC is stuck! Is it EAD all the way to the end thereafter?
Of course you can apply for an extension even if your PD is current, only you won't get a 3 year extension but a 1 year extension. Your pal probably didn't apply because he wanted to get 3 years.
I know someone whose H1 is expiring soon. He wasn't able to apply for H1extension till July 31st as PD was current. He is applying in August in Premium.
What happens if someones PD remains current ( say someone in 2000 stuck in FBI namecheck) and GC is stuck! Is it EAD all the way to the end thereafter?
Of course you can apply for an extension even if your PD is current, only you won't get a 3 year extension but a 1 year extension. Your pal probably didn't apply because he wanted to get 3 years.
2010 clone wars wallpaper.
buptlsp
09-19 09:49 PM
Nope, it's from NSC
Congrats Buddy.....Was your I140 approved from TSC?
Congrats Buddy.....Was your I140 approved from TSC?
more...
FinalGC
08-04 09:25 AM
Great idea
hair Clone Wars Collage wallpaper
Arvin_H1
08-19 02:33 PM
If you reappeal I think until the decision comes you are okay. But I'm
not sure if you can work. Need to check with an attorney.
If your job description need to match the degree you should be fine.
Did you submit a credential evaluation? I think if both of the above
things are okay, you should be through.
If I were you I will contact an attorney, like Sheela or Rajiv who
knows what they are doing.
babu
Thank you all for your advices.
As this is my H1 extension, my credential evaluation done with first H1 process itself. and, my I-94 also expired in Sept'07.
Does anyone know any good attorney that i can contact and take more suggestions on my issue..?
not sure if you can work. Need to check with an attorney.
If your job description need to match the degree you should be fine.
Did you submit a credential evaluation? I think if both of the above
things are okay, you should be through.
If I were you I will contact an attorney, like Sheela or Rajiv who
knows what they are doing.
babu
Thank you all for your advices.
As this is my H1 extension, my credential evaluation done with first H1 process itself. and, my I-94 also expired in Sept'07.
Does anyone know any good attorney that i can contact and take more suggestions on my issue..?
more...
vin13
10-26 05:48 PM
What you think , doesn't matter.
Cant fly through FRANCE/UK for sure, without a valid US visa stamped.
People had issues even with Lufthansa, but as per law on the German Consulate , a person should be able to transit through Germany. But i would avoid it.
Emirates/Direct AI/Continental should be OK from East Coast.
Alright. I did not realize that this was a case of no valid visa on passport. I cannot attest to that.
Cant fly through FRANCE/UK for sure, without a valid US visa stamped.
People had issues even with Lufthansa, but as per law on the German Consulate , a person should be able to transit through Germany. But i would avoid it.
Emirates/Direct AI/Continental should be OK from East Coast.
Alright. I did not realize that this was a case of no valid visa on passport. I cannot attest to that.
hot Star Wars: The Clone Wars
pbuckeye
04-29 09:58 AM
Thanks IV team.
Does IV know if Schumer is getting any traction after meeting with other republican lawmakers? Lugar indicated previously that he is interested in the EB part.
Does IV know if Schumer is getting any traction after meeting with other republican lawmakers? Lugar indicated previously that he is interested in the EB part.
more...
house (Wallpaper created
USDream2Dust
09-24 12:37 PM
I got it for missing Medicals for both me and my wife.
I would trust anytime my lawyer than USCIS.
here is what they did.
Wrong address even though filed for AR11 online and received Soft LUD online. This is one year old address and they didn't even put APT# in my old address. God's Grace I received it by mail fowarding without APT#
Didn't update my online status. Still showing Pending and no LUD or soft LUD
I know my lawyer put in G28 and medicals both when he was mailing it as I was the one who finally inspected and mailed the package.
Some other folks also got for Medicals. Looks to me a routine to get rid off pending cases or preadjudicate.
Weird but true in my case
I would trust anytime my lawyer than USCIS.
here is what they did.
Wrong address even though filed for AR11 online and received Soft LUD online. This is one year old address and they didn't even put APT# in my old address. God's Grace I received it by mail fowarding without APT#
Didn't update my online status. Still showing Pending and no LUD or soft LUD
I know my lawyer put in G28 and medicals both when he was mailing it as I was the one who finally inspected and mailed the package.
Some other folks also got for Medicals. Looks to me a routine to get rid off pending cases or preadjudicate.
Weird but true in my case
tattoo Clone Trooper Foreground with
lazycis
01-10 08:26 AM
EB-2, 485 and 140 submitted in June 2007 concurrently, RD and PD both are June 2007. I borrowed my husband's Swiss nationality. Now 140 approved, AP and EAD got, but NC is still pending.
Just curious: When will USCIS process my 485? According to my nationality or my husband's? If it's mine, god, I may have to wait for 4, 5 years because of the terrible VB backlog! Is it after 485, everyone no matter which nationality, the processing time should be the same. All the world line up together. Please correct me if I am wrong.
The bad part of it in your case is that NC is still pending.
http://www.dhs.gov/xlibrary/assets/CISOMB_Annual%20Report_2007.pdf
"As of May 2007, USCIS reported a staggering 329,160 FBI name check cases pending, with approximately 64 percent (211,341) of those cases pending more than 90 days and approximately 32 percent (106,738) pending more than one year. While the percentages of long-pending cases compared to last year are similar, the absolute numbers have increased. There are now 93,358 more cases pending the name check than last year. Perhaps most disturbing, there are 31,144 FBI name check cases pending more than 33 months as compared to 21,570 last year � over a 44 percent increase in the number of cases pending more than 33 months."
So nobody can tell you, when and why, even the USCIS itself. It could be 6-12 months, it could be 2-10 years. I had to take USCIS/FBI to court to help them resolve my NC after waiting about 3 years.
http://en.wikibooks.org/wiki/FBI_name_check
Just curious: When will USCIS process my 485? According to my nationality or my husband's? If it's mine, god, I may have to wait for 4, 5 years because of the terrible VB backlog! Is it after 485, everyone no matter which nationality, the processing time should be the same. All the world line up together. Please correct me if I am wrong.
The bad part of it in your case is that NC is still pending.
http://www.dhs.gov/xlibrary/assets/CISOMB_Annual%20Report_2007.pdf
"As of May 2007, USCIS reported a staggering 329,160 FBI name check cases pending, with approximately 64 percent (211,341) of those cases pending more than 90 days and approximately 32 percent (106,738) pending more than one year. While the percentages of long-pending cases compared to last year are similar, the absolute numbers have increased. There are now 93,358 more cases pending the name check than last year. Perhaps most disturbing, there are 31,144 FBI name check cases pending more than 33 months as compared to 21,570 last year � over a 44 percent increase in the number of cases pending more than 33 months."
So nobody can tell you, when and why, even the USCIS itself. It could be 6-12 months, it could be 2-10 years. I had to take USCIS/FBI to court to help them resolve my NC after waiting about 3 years.
http://en.wikibooks.org/wiki/FBI_name_check
more...
pictures clone wars wallpaper.
India76
09-17 01:53 PM
On different note, I just realized that I have one red dot against my name... :-) I never posted anything to offend anybody.. How can see who gave me a red dot and for what reason?
dresses clone wars wallpaper
GC_SUCK
09-26 11:19 AM
Thanks. But GC still sucks because of the long process. Good Luck to everyone.
PD - 04/2002
EB3 - ROW
I-485 RD - 03/2007
I-485 AD - 09/2007
PD - 04/2002
EB3 - ROW
I-485 RD - 03/2007
I-485 AD - 09/2007
more...
makeup quot;Star Wars: The Clone Warsquot;
purgan
10-14 08:17 PM
Another recent story on Canadian Skilled Immigration...
http://www.canada.com/topics/news/national/story.html?id=752a2097-a21f-42d1-b9c4-d15bab949d9f&k=9534
Geoffrey Scotton, Calgary Herald
Wednesday, October 11, 2006
gscotton@theherald.canwest.com
CALGARY - Alberta and the rest of Canada need to move quickly to boost immigration and take better advantage of skills so many new Canadians bring to their chosen home or risk being left behind in a global race for talent, says the head of Canada's largest bank.
''We must significantly increase these efforts and others if Canada is going to have the necessary human resources to compete in today's global economy,'' Royal Bank of Canada president/chief executive Gordon Nixon said to a dinner of the Immigrant Access Fund in Calgary Tuesday evening.
''Make no mistake, Canada is in a global war for talent. We must be a destination of choice for skilled immigrants and professionals or we will not succeed ... If we do, we will have a unrivaled advantage. If we don't, we will face an uphill battle just to maintain our quality of life.''
David Baxter, a demographer and economist with the Vancouver-based Urban Futures Institute Society, agrees with Nixon's analysis, suggesting Canada faces a ''perfect storm'' of demographic labour force pressures. Those factors include a declining birthrate, a massive number of Canadians approaching retirement and relatively fewer Canadians entering the workforce as they reach working age.
''You don't need a robust economy to be able to say there's going to be a problem here. We're probably now at the point now that without immigration our labour force stops growing,'' he said. ''This is a long-term issue, let's regularize it. We've got to move away from this talk of temporary (workers).
''What I would look for is young, healthy, intelligent, honest energetic people, preferably with an entrepreneurial spirit - and more employee sponsorship.''
Nixon argued that nowhere is the potential of immigrant expertise and contribution more evident than in Calgary, which is suffering labour shortages across the board, in all industries, from the unskilled worker to the skilled professional.
''Calgary is facing a shortfall of as many as 90,000 workers over the next five years ... by 2025 the shortage across the province will be well through 300,000,'' said Nixon. ''Alberta is at the cusp of a trend we're seeing nationwide.''
Nixon argued that immigration must be viewed by policymakers as a strategic economic development tool that will help to define 21st century Canada. He noted the country has in the past used immigration as a tool of industrial policy, particularly around the settlement and development of the West.
That kind of approach is needed again, Nixon asserted, as is better utilization of under-employed immigrants already in Canada, a phenomenon that RBC economists has estimated costs Canada $13 billion annually.
''We can no longer view immigration as a temporary employment agency,'' said Nixon. ''We need to start looking at immigration as a blueprint for nation-building, and we must find the right balance between social justice and economic need.''
Baxter believes that Alberta is making the strongest effort of any of the Canadian provinces to attract and efficaciously absorb new Canadians. However, he noted that while immigration policy remains largely the purview of the federal government, questions of professional accreditation and other determinants limiting immigrants' entry into the Canadian workforce rest in provincial hands.
''Alberta is at the forefront of this. The provincial government recognizes this (the need for more workers) and so does industry,'' said Baxter, referring to Alberta's Labour Force Strategy, released in July.
http://www.canada.com/topics/news/national/story.html?id=752a2097-a21f-42d1-b9c4-d15bab949d9f&k=9534
Geoffrey Scotton, Calgary Herald
Wednesday, October 11, 2006
gscotton@theherald.canwest.com
CALGARY - Alberta and the rest of Canada need to move quickly to boost immigration and take better advantage of skills so many new Canadians bring to their chosen home or risk being left behind in a global race for talent, says the head of Canada's largest bank.
''We must significantly increase these efforts and others if Canada is going to have the necessary human resources to compete in today's global economy,'' Royal Bank of Canada president/chief executive Gordon Nixon said to a dinner of the Immigrant Access Fund in Calgary Tuesday evening.
''Make no mistake, Canada is in a global war for talent. We must be a destination of choice for skilled immigrants and professionals or we will not succeed ... If we do, we will have a unrivaled advantage. If we don't, we will face an uphill battle just to maintain our quality of life.''
David Baxter, a demographer and economist with the Vancouver-based Urban Futures Institute Society, agrees with Nixon's analysis, suggesting Canada faces a ''perfect storm'' of demographic labour force pressures. Those factors include a declining birthrate, a massive number of Canadians approaching retirement and relatively fewer Canadians entering the workforce as they reach working age.
''You don't need a robust economy to be able to say there's going to be a problem here. We're probably now at the point now that without immigration our labour force stops growing,'' he said. ''This is a long-term issue, let's regularize it. We've got to move away from this talk of temporary (workers).
''What I would look for is young, healthy, intelligent, honest energetic people, preferably with an entrepreneurial spirit - and more employee sponsorship.''
Nixon argued that nowhere is the potential of immigrant expertise and contribution more evident than in Calgary, which is suffering labour shortages across the board, in all industries, from the unskilled worker to the skilled professional.
''Calgary is facing a shortfall of as many as 90,000 workers over the next five years ... by 2025 the shortage across the province will be well through 300,000,'' said Nixon. ''Alberta is at the cusp of a trend we're seeing nationwide.''
Nixon argued that immigration must be viewed by policymakers as a strategic economic development tool that will help to define 21st century Canada. He noted the country has in the past used immigration as a tool of industrial policy, particularly around the settlement and development of the West.
That kind of approach is needed again, Nixon asserted, as is better utilization of under-employed immigrants already in Canada, a phenomenon that RBC economists has estimated costs Canada $13 billion annually.
''We can no longer view immigration as a temporary employment agency,'' said Nixon. ''We need to start looking at immigration as a blueprint for nation-building, and we must find the right balance between social justice and economic need.''
Baxter believes that Alberta is making the strongest effort of any of the Canadian provinces to attract and efficaciously absorb new Canadians. However, he noted that while immigration policy remains largely the purview of the federal government, questions of professional accreditation and other determinants limiting immigrants' entry into the Canadian workforce rest in provincial hands.
''Alberta is at the forefront of this. The provincial government recognizes this (the need for more workers) and so does industry,'' said Baxter, referring to Alberta's Labour Force Strategy, released in July.
girlfriend Star Wars: The Clone Wars
![clone wars wallpapers. [Release] Clone Wars theme](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_ud0X_C506D0eKT-RzJhkKRAAmOMpK8I1IJ3pX5IC-UH_Go7_EnGiySTrqey1uChtH9renoyKwQo_6M3JgjpBiudi21MsSI3ioyBQwNlDW1b5C3rmBaHFMlpyaMLVOnwJjfZ9ZNBF93SZAmhYL5JN_6P7D5wQ-v_N4I9IuxVJWD1Brw7IMYhrZubIWUogXEWDMNdqudusR5MyAPBc-U5IzWMrkN2c7Vf2I2RlEPJC-pvt_gaMpNcNv6hT0oM0DA=s0-d "[Release] Clone Wars theme")
bigboy007
11-03 01:24 PM
Thanks what dox did u send ?
hairstyles Free Clone Wars Master Yoda,
Tantra
07-13 11:40 AM
Please post a message here to help encourage more guests of join in.
fasterthanlight�
05-11 03:58 PM
Erm, kirupa will only add 4 of these stamps to the stamp page. Thats the limit for content similar stamps apparently.
a_paradkar
08-08 07:45 AM
Pamposh:
I am in the same boat. Is there anyway of figuring out whether USCIS Vermont recevied and Fwd to TSC / NSC?
What is your back up plan
I am in the same boat. Is there anyway of figuring out whether USCIS Vermont recevied and Fwd to TSC / NSC?
What is your back up plan
ليست هناك تعليقات:
إرسال تعليق